Owner’s manual
EN
9
oPERATIoN
Analogue mode
1. To enable analogue mode, connect jack plug to line in of the
transmitter.
2. Connect the other end of the 3,5 mm stereo jack cable to line
out of the external device.
3. Connect the transmitter to power supply. The device enters
pairing mode (LED indicator starts to flash blue and red
alternately).
4. Turn on the receiver (e.g. Bluetooth headphones) and enter
pairing mode.
5. Make sure that the devices are close to each other while
pairing.
6. The devices should pair automatically.
7.
Now you can play audio files from your computer.
USB Mode
1. Connect USB interface of the transmitter to USB port of
the device which does not support Bluetooth function (e.g.
computer).
2. The transmitter is installed as a sound card on your device.
3.
LED indicator of the transmitter starts to flash red and blue
alternately.
4. Turn on the receiver, e.g. Bluetooth headphones or Bluetooth
speaker and enter pairing mode.
5. Make sure the devices are close to each other while pairing.
6. The devices should pair automatically. Blue LED of the
transmitter is on when the devices are paired.
7.
Now you can play audio files from your computer.
Notes:
•
Every time the transmitter is switched on, it will connect to last
