Krüger & Matz KM0232-T3, Owner'S Manual

Page: 18 / 68

18
Owner’s manual
EN
BASIC OPERATION
Switch the TV on and off
1. When the TV is connected to power supply, it will be turned on directly or be in
standby mode (power LED is on). If the TV is in standby mode, press the Power
button to turn it on.
2. To put the TV set into standby mode, press the Power button on the TV set or
remote control. The TV set remains on, but with low energy consumption. To
switch off the TV set, unplug it from power supply.
Note: For some models, press the Power button to switch off the TV set.
INITIAL SETUP
The first time you switch the TV set on, the Welcome screen appears, which guides
you through the initial setup process. Follow the on-screen instructions to finish the
initial setup process such as selecting the language, scanning channels and more.
During each step, either make a choice or skip the step. If you skip a step, you can
perform the setup later from the settings menu.
1. Connect the device to power supply
socket.
2. Connect the antenna cable into
the appropriate RF input.