Krüger & Matz EDGE 1087, Owner'S Manual

Page: 14 / 44

14
Owner’s manual
EN
PreParing the Device fOr OPeratiOn:
a. connect one end of the power adapter to the device and the other to power
mains outlet and charge the device fully.
b. Press the power switch for about 2-3 seconds to switch the device on.
c. Follow the instructions in the startup wizard to set up your device.
During the startup, the wizard prompts you to register for your Microsoft
account. If you do not yet have a Microsoft account, please set one up here.
d. After completion of the startup, your device is configured. This may take several
minutes to complete. Do not turn the device off during this process!
navigatiOn
There are few simple gestures you need to know about to operate this device.
unlOcKing the DiSPlay
Drag the lock screen upwards to unlock the screen.
If your device is password-protected, you must then enter the password.
Tap Swipe
Drag Pinch
Please note: below illustrations and descriptions concerning Windows
operating system are for reference only, and may vary from actual
software on your device!