41
Make sure that the power cable is not
damaged in any way.
Check both ends of the power cable. Make
sure that these are plugged in and that the
(page 30).
cartridge is inserted.
in place with all 3 tabs and is fully locked
(
, page 30).
Disable the locking function on the remote
control (
,
page 37).
Unplug the power cable and then plug it
back in.
Check the battery (3V lithium CR2025).
Clean the IR receiver with a dry, lint-free
cloth.
(page 35).
Having joined the power cord or
remote control is blocked for
about 10 seconds
