3
Single-Duct and Retrofit Terminal Units IOM
GENERAL
The LMHS, LMHS-LC, RVE, and SVE single duct terminals are
available with factory installed Pneumatic, Analog electronic,
and DDC control options. Figure 1 shows a basic LMHS unit.
SHIPPING
Inspect for damage upon receipt. Shipping damage claims
should be filed with shipper at time of delivery. LMHS and
LMHS-LC units with basic configuration or with hot water
coils, RVE units, and SVE units are packaged into boxes and
are stacked onto pallets. LMHS and LMHS-LC units with
attenuation or electric heat are stack directly onto pallets.
In both instances, pallets shall not be stacked on top of one
another.
STORAGE AND HANDLING
Store in a clean, dry, and covered location. Do not stack
pallets. When unpacking units, care should be taken that
the inlet collars and externally mounted components do not
become damaged. Do not lift units using collars, inlet flow
sensors, or externally mounted components as handles. Do
not lay uncrated units on end or sides. Do not stack uncrated
units over 6 ft high. Do not handle control boxes by tubing
connections or other external attachments.
UNIT WEIGHTS
Please see Table 5.A and Table 5.B in Appendix A for unit
weights.
INITIAL INSPECTION
Once items have been removed from the carton, check
carefully for damage to duct connections, inlet probes or
controls. File damage claim immediately with transportation
agency and notify Factory.
Figure 2: Example Identification Label
FOR OPERATIONS & MAINTENANCE MANUAL SEE
WWW.KRUEGER-HAVAC.COM
TAG: VAV-1-01
FACTORY NO:
441261
MODEL NO:
LMHS
MAX CFM:
400
VP:
.190
FAN CFM:
COIL:
E41 - 277/1P/1S
CONTROL CODE:
D001
LINE:
001
AUX CFM:
400
VP:
.156
SIZE:
08-08
MIN. CFM:
52
VP:
.003
COIL:
E41 - 277/1P/1S
CONTROL CODE:
D001
AIR
FLOW
UP
CFG:
3*3*2*OR*08*0*D001*00*0*0S0000*000*E41*4.0*KH000
UNIT IDENTIFICATION
Each unit is supplied with a shipping label and an
identification label. Figure 2 is an example of the
identification label that is attached to each unit.
INSTALLATION PRECAUTION
Check that construction debris does not enter unit or
ductwork. Do not operate the central-station air-handling
fan without final or construction filters in place. Accumulated
dust and construction debris distributed through the
ductwork can adversely affect unit operation.
SERVICE ACCESS
Provide service clearance for unit access.
CODES
Install units in compliance with all applicable code
requirements.
WARRANTY
All Krueger furnished items carry the standard 1-year limited
warranty from the date of shipment.
Figure 1: Basic LMHS Unit
PRE-INSTALLATION