1
3
4
2
RAISE
LOWER
1
Install the track into the rear sockets one end at a time.
Center track so that each end is partially inserted in the
track sockets.
11.
T E M P O R A R I LY I N S TA L L R E A R T R A C K
1
3
4
Check the rear track for level.
Use a 1/16” allen wrench on the set screw to raise and
lower each rear track socket until level. Adjust lateral
position manually as needed.
Remember that the screws attaching the track socket
to the wall must be slightly loose for this adjustment.
Adjust front sockets so that they are at the same
height as the rear sockets. Confirm that neighboring
sockets are at the same height using a level.
Mark the final positions on the wall.
12.
A D J U S T T R A C K P O S I T I O N
2
