IMPORTANT SAFETY INSTRUCTIONS
When using your Tactile Ring Signaler, basic safety precautions should
always be followed to reduce the risk of fi re, electric shock and per-
sons including the following:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on the transmitter
and pager.
3. Do not use the transmitter or pager near a bathtub, washbasin,
kitchen sink or laundry tub, in a wet basement, near a
swimming pool or anywhere else there is water.
4. Do not use the telecommunication device with this transmitter to
report a gas leak in the vicinity of the leak.
5. Unplug the transmitter from the wall outlets, and the pager from
the adapter cord before cleaning. Do not use liquid cleaners or
aerosol cleaners on the telecommunication device. Use a damp
cloth for cleaning.
6. Place the telecommunication device with the transmitter on a
stable surface. Serious damage and/or injury may result if the
telecommunication device falls.
7. The telecommunication device with the transmitter should never
be placed near or over a radiator or heat register. This
telecomunication device should not be placed in a built-in
installation unless proper ventilation is provided.
8. Recharge this pager using the electrical voltage as stated on
the base unit or the owner‘s manual. If you are not sure of
the voltage in your home, consult your dealer or local
power company.
9. Do not place anything on the power cord. Install the
telecommunication device with the transmitter where no one will
step or trip on the cord.
10. Do not overload wall outlets or extension cords as this can
increase the risk of fi re or electrical shock.
11. Never push any objects through the slots in the transmitter or
pager, as touching dangerous voltage points or short out parts
could result in fi re or electrical shock. Never spill liquid of any
kind on the transmitter and pager.
12. To reduce the risk of electrical shock, do not take this
transmitter and pager apart. Opening or removing covers may
expose you to dangerous voltages or other risks. Incorrect
reassembly can cause electric shock when the appliance is
subsequently used.
3
TRS-100 Señal del Timbre de Teléfono
Especifi caciones
Función encendida líneas telefónicas análogas
Dimensione Físicas
Dimensiones (Pager) . . . . . . . . . . . . . . . . . 3.5” x 2.25” x .75”
Dimensiones (Transmisor) . . . . . . . . . . . . . 2.5” x 1.3” x .625”
Eléctrico
Grado . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . UL Mencionado
Adaptador . . . . . . . . . . . . . . . . . . . . . . . . . . .DC12V, 500 mA
Batería
Número requerido . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Tipo . . . . . . . . . . . . . . . . . . . . . . . . . .8.4V Batería Recargable
Tiempo espera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 hrs
16
ENGISH
SP
AINISH
ENGISH
SP
AINISH
