KNS360
LookOut
™
Series
The lighting flash with an
arrowhead within a triangle
alerts you to uninsulated
dangerous voltage within the
product's enclosure that
could cause an electric
shock
CAUTION
The exclamation point within
a triangle alerts you to
presence of important
operating, maintenance and
servicing instructions in this
user's manual.
RISK OF ELECTRIC
SHOCK DO NOT OPEN
TO REDUCE THE RISK OF
ELECTRIC SHOCK DO NOT
REMOVE COVER (OR BACK) NO
USER SERVICEABLE PARTS
INSIDE. REFER SERVICING TO
QUALIFIED PERSONNEL.
Voice/TDD: 817-738-2485 | VP: 817-200-1324| Fax: 817-738-1970 |
www.krownmfg.com
MANUFACTURING
PAIRING ADDITIONAL TRANSMITTERS & CHIMES
If the Sidekick receiver & Wireless Push Button Doorbell transmitter are
purchased as a kit (K-DBKIT360), they come paired and ready for use.
Step 1: Insert the included battery into the
Wireless Push Button Doorbell Transmitter.
Step 2: Plug the Sidekick receiver into a
standard wall outlet.
Step 3: Press and hold the • Program button
for three seconds. A red LED light will blink
indicating the unit is in pairing mode. If the
light is solid, this means there are already
two (2) Transmitters paired and you must
clear the transmitters paired and you will
need to clear the transmitter memory
from the receiver (see instructions below).
Step 4: Press the Chime
♫
button to
scroll through available chimes. Once you
hear a chime you prefer, do not press any
buttons the melody is set for the Wireless
Push Button Doorbell Transmitter.
Step 5: Once the chime is selected, trigger
the transmitter by pressing the push button. If you
are pairing a different type of transmitter, trigger
that transmitter by following the instructions
provided for that transmitter.
Step 6: If successful, the receiver will generate a
short tone. Press the Program button again to exit
programming mode. The unit is now ready to use.
Chime
button
♫
Program
button
•
CHANGING THE CHIME
Step 1: Press and hold the • Program button for three (3) seconds to
enter pairing mode.
Step 2: Press the • Program button to scroll between two transmitters.
Step 3: Press the Chime
♫
button until you have found your desired
melody.
Step 4: Press the Wireless Push Button Doorbell to trigger the
transmitter.
Step 5: Once you hear two short tones, press the
• Program button
to lock the melody and exit.
CLEARING TRANSMITTER MEMORY FROM RECEIVERS
The LookOut™ Sidekick receiver can pair with two (2) transmitters at a
time. If you need to replace or change the type of transmitter
notification, you must delete all memory from the Sidekick receiver by
following the instructions below:
Step 1: Press and hold the • Program button for three (3) seconds to
enter pairing mode.
Step 2: Press and hold the • Program button and Chime
♫
button
together for three (3) seconds to delete the memory.
Step 3: The Sidekick receiver will generate a beep tone to
indicate all transmitters in memory are now deleted.
Step 4: The pairing indicator LED will flash red to indicate a
successful delete.
Step 5: You are now ready to pair a new transmitter to the
Sidekick receiver.
TRANSMITTER BATTERY LOW
When the indicator lights flash constantly on the Wireless Push Button
Doorbell transmitter and the Sidekick receiver after being triggered, this
indicates this transmitter is battery low. Please replace the battery as soon
as possible.
We are on the LookOut™ for you to expand your LookOut™ System.
Follow the included instructions to program additional push buttons
or transmitters to add more doors and/or more rooms.
Additional KNS360
LookOut™ Series Products
:
•
Krown LookOut™ All-in-One Notification System
K-KNS360
•
Krown LookOut™ Sidekick Receiver & Wireless Push Button Doorbell
Transmitter
K-DBKIT360
•
Krown LookOut™ Sidekick Receiver
K-KNS360ER
•
Krown LookOut™ Wireless Push Button Doorbell Transmitter
•
K-KNS360DT
•
Krown LookOut™ Wireless Telephone Transmitter
K-KNS360TT
IMPORTANT SAFETY INSTRUCTIONS
1.
Read/keep these instructions.
2.
Read all warnings.
3.
Follow all instructions.
4.
Do not use this device near water.
5.
Clean only with a dry cloth.
6.
Do not block any ventilation openings. Install in
7.
accordance with the manufacturer’s instructions.
8.
Do not install near any heat sources such as radiators, heat registers, stoves,
or other.
9.
Do not tamper with the polarized & grounding plug. Each blade of the plug
has a special purpose for seamless communication & safety. A grounding
type plug has two blades and a third grounding prong.
10.
Only use attachments/accessories specified by the manufacturer.
11.
Unplug this product during lightning storms or when unused for long periods
of time.
12.
This product shall not be exposed to dripping or splashing water and that no
object filled with liquid such as vases shall be placed on the product. Liquid
damage is not covered by warranty.
13.
Mains plug is used as disconnect device and it should remain readily
operable during intended use. In order to disconnect the apparatus from
the mains completely, the mains plug should be disconnected from the
mains socket outlet completely.
14.
Caution marking is located at the bottom of device.
Innovation & Design for Accessibility, Diversity & Inclusion for All
Wireless Push Button
Doorbell Transmitter
(WPBDT)
F C C Statement
:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment to an outlet on a circuit different from that to which
the receiver is connected.
This device complies with part 15 of the FCC rules. Operation is subject to the following to
tow conditions: (1) This device may not cause harmful interference, and (2) this device
may accept any interference received, including interference that may cause
undesired operation.
Note: Modifications to this product will void the user’s authority to operate this equipment.
Light/Low Battery
Indicator (constant
flashing)
Pairing/Low
Battery Indicator
(constant flashing)
Warning: To prevent fire or shock hazard. Do not expose this unit to rain or moisture.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
