![background image](http://html1.mh-extra.com/html/krown/2000dx/2000dx_instruction-manual_2004988030.webp)
USING THE OPTIONAL ASCII FEATURE AND FAST TYPE (CONT.)
When calling a computer service to receive information, your TDD should be setup as follows:
• 300 Baud
• Full Duplex
• Originate
Remember: When using ASCII for TDD-to-TDD, your MP2000D is preset in the correct modes; the
only change that may be needed would be the selection of ORIGINATE or ANSWER mode, depend-
ing upon who placed the call first.
TO CHANGE MODE SETTINGS
You will remain in the preset
ASCII mode.
You are going to change the
preset mode.
YES, chooses Half Duplex;
NO, chooses Full Duplex.
YES, chooses 300 Baud;
NO, chooses Baud mode.
YES, chooses Originate mode;
NO, chooses Answer mode.
After the three selections have been made, the selected modes are displayed.
Example: If the last three questions have been answered with [N], the display will read 110 BAUD,
FULL, ANS.
TO MAKE YOUR ASCII CALL
Placing a call with your Memory Printer ASCII is done the same way as placing a call in Baudot. The
only difference is setting the mode to ASCII.
To make the call acoustically, place the telephone handset in the acoustic cups with the cord to
the LEFT.
PRESS:
To make the call in Direct Connect (MP2000D), connect your TDD as
described on page 18, and make sure you are in ORIGINATE mode.
BACK
SPACE
+
CTRL
USE ASCII? Y/N
Y
CHANGE MODES? Y/N
OR
N
300 BAUD, HALF, ANS
Y
HALF DUPLEX? Y/N
N
300 BAUD? Y/N
Y
or
N
ORIGINATE? Y/N
Y
or
N
110 BAUD, FULL, ANS
Y
or
BACK
SPACE
+
CTRL
Y
USE ASCII? Y/N
28