20
Kronings®
–
Lammefjordsvej 5
–
6715 Esbjerg N
–
Denmark
Phone +45 7022 5840
VAT No DK -40193189
WARNING
: The maximum speed rating on
the tires installed on your trailer is 120
km/h. Do not exceed this rating. Failure to
heed
this
warning
could
cause
catastrophic tire failure resulting in
property damage, personal injury, and/or
death.
WARNING
: When removing aluminum-
forged wheels from the spindle, it is very
important to mark them to ensure the
wheel is placed in the same position of the
drum when reinstalling. If the aluminum-
forged wheel is to be mounted on a
different drum, it is important to sand all
loose corrosion from the mating surfaces.
WARNING
: Wheel separation can occur:
1.
On first trip, tighten wheel nuts at
beginning of trip.
2.
Thereafter, check wheel nuts before
each trip
3.
Following winter storage, check wheel
nuts before beginning a trip
4.
Following excessive braking, inspect
wheel nuts. Do not over torque
Tire Load and Inflation Information
Maintaining proper tire inflation pressure is essential for both tire safety and performance.
Proper Tire Inflation
The level of air in your tires affects your vehicle
’s
overall performance. A maximum inflation pressure
specification is fou
nd on the
trailer’
s exterior on a sticker on the front left corner of the trailer, as well as on
the original equipment of the tires.
Air pressure should be checked based on the load on each individual tire. Cold Inflation Pressure should be
adjusted to handle the maximum tire load, and all tires on the axle should carry the same inflation pressure.
Cold tire inflation pressure is the tire pressure checked in the morning before you drive more than a few miles
or before rising ambient temperatures
or the
sun’s rad
iant heat affects it.
