How to use:
When 230V are connected, a small flash appears on all the LED’s on
the control panel. This is normal.
When 230V are connected to HEAT, the unit is ready for action.
You find 2 pushbuttons, a turning knob and 7 LED’s on the control
panel.
The pushbuttons operate in a ”rolling action”.
This means that each of the buttons has 4 steps. If you push 3 times
on one the buttons the function will shift from 1 to 2 to 3. If you
push the button the 4’ time, the function stops and you are back to
zero.
The turning knob has a graphical increasing scale, indicating an
increasing heat amount.
Turning the knob all to the right you select the lowest temperature
settings, app. 5-10 deg.C.
Turning the knob all to the left you select the highest temperature
settings, app. 30-35 deg.C.
For starting you select a suitable position for the knob. That could be
in the middle position.
Now turn on the desired heating level with the desired fan speed.
When the temperature in the wagon has stabilized you simply adjust
the temperature in the wagon by making small adjustments on the
turning knob on the control panel.
On the control panel you can see on what level the fan and the heat
operates.
Over the FAN button 3 LED’s are placed.
From left to right these LED’s means:
1 LED on means that the fan runs on level 1.
2 LED on means that the fan runs on level 2.
3 LED on means that the fan runs on level 3.
No LED’s on means that the fan is not running.
19
