Activating and Pairing the Robot Trolley with the remote control
The Robot Trolley comes pre-paired with the remote control.
-
Turn on the Robot Trolley by simply pressing the Start/Stop button for maximum 1-2 seconds.
-
Turn on the remote control by pushing the forward button (
) once.
-
The Robot Trolley is now ready to use.
IMPORTANT
Re-pairing the Robot Trolley
1.
Turn on the Remote Control by pushing the Forward button (
) once. The green light on the Remote Control will
turn on.
2.
Turn on the Robot Trolley by clicking the Start/Stop button. The green light on the Robot Trolley will turn on.
3.
Now simultaneously press and hold the Turn Right button (
→
) on the Remote Control and press and hold the
Start/Stop button on the Robot Trolley, both LED lights start to blink for 8 seconds, after which the LED lights will
light constantly. Now the Robot Trolley and Remote Control have been re-paired and are ready to use. If this
pairing procedure is unsuccessful, the Remote Control will turn off automatically in around 15 seconds, and the
user needs to redo the procedure from step 1.
The start/stop button and operating status
indicator are located on the front of the Robot
Trolley
(The diode lighting can be difficult to see in
strong sunlight):
The maneuvering buttons on the remote control (RT4500 model):
Forward:
(
);
Turn right:
(
→
)
Backward:
(
)
;Turn left:
(
)
The battery indicator shows the Robot Trolley
’s remaining battery
status. If the capacity is too low, the CT may not respond correctly.
If the indicator itself weakens, the remote control battery needs to be
replaced, otherwise the CT may not respond correctly.
Maneuvering the Robot Trolley
The Robot Trolley logo on the remote control must always point toward the trolley.
Use both hands on the remote control, and hold it horizontally during use.
-
Forward:
To move forward, in the same direction as the antenna, hold down forward button (
).
-
Backward:
To move backward/reverse, hold down the back button (
).
-
Turn:
To turn, hold down the forward (
) or backward (
) button while at the same time holding down one of the
turn buttons of the remote control to turn right (
→
) or left (
). The Robot Trolley will only turn if you first hold
the forward or backward button, followed by a turn button.
-
Stop:
To stop the Robot Trolley from moving, simply release the forward or backward button.
Faster mode for RT2500RS
On RT2500RS, besides normal speed operation, it can also be operated as a faster speed, by pressing the rabbit button
meanwhile with forward (
) or backward (
) button. The faster mode will ONLY work with forward and backward, but not
turning operation.
Operating
Status
Start/Stop
Button
Battery Indicator
Rabbit button for faster speed
7
