Kronen-Mixer KM-2
16
Instruction Manual
Container removal
First remove the complete container from the motor
base and empty it totally.
Attention:
To loose the plastic threaded ring,
turn to the right. Clockwise, like closing
a water tap, as the threaded ring is
left-threaded!
Do not tear the handle (risk of breakage)
.
OPEN
TURN
RING
8. MOTOR PROTECTION
9. CLEANING
Container:
The mixing container should not be cleaned in the dishwasher while still
installed (see chapter “Operating instructions”;
left-threaded!
). They must
first be dismantled.
The container should be cleaned thoroughly after each use or once a day.
Danger!
Thorougly clean the machine after use every time. Incorrect and careless
cleaning could put the consumer at considerable risk of micro-organism
infection.
Cutter head.:
simply rinse and, if necessary, scrub off.
Never place into water or the dishwasher (no warranty).
Threaded ring:
should be cleaned especially inside, by using a hard brush.
When the machine is overloaded or overheated, it switches off
automatically.
If this occurs, after about 60 seconds, please press the black button
on the bottom plate of the motor base.
If you notice any irregularities or defects, please contact your supplier. For more informa-
tion see chapter “Repairs”.
When the machine stops automatically, immediately remove
the complete container from the motor unit, pull out the
plug and turn off the machine (Position: “0”).
The motor unit must never be submerged in, or sprayed with
water or any other liquid! Never attempt to clean it with a water jet!
Cleaning of the inside should only be made at an authorized service
center.
If necessary, clean the motor unit with a damp cloth.
Motor unit:
Summary of Contents for KM-2 S
Page 2: ......
