manualshive.com logo in svg

Krone KWT 1600, Original Operating Instructions, Page: 52 / 96

Share
Download
Krone KWT 1600 Original Operating Instructions Download Page 52

8

Operation

8.2

Releasing/applying the parking brake

52

KWT 1600

Original Operating Instructions 150000169_04_en

8.2

Releasing/applying the parking brake

INFORMATION

In order to prevent the machine from rolling away, use the wheel chocks in addition to the
parking brake, 

refer to page 53

.

The parking brake is located at front right on the main frame of the machine in the direction of
travel. The parking brake is used to secure the machine from unintentionally rolling away,
especially when the machine is disconnected from the tractor.

1

1

2

2

KW000-106

Parking brake applied

Parking brake released

Applying the parking brake (2)

„

Push in the key (1) and apply the parking brake (2) until the resistance has increased
noticeably.

Releasing the parking brake (2)

„

Push in the key (1) and press parking brake (2) all the way down.

Mounting safety cable

1

3

2

KW000-109

Summary of Contents for KWT 1600

































































































Reviews:

No comments