Krone KW 5.50 / 4 x 7 T, Operating Instructions Manual

Page: 32 / 42

V - 2
Care and maintenance
5.3 Gearbox
The main gearbox of the rotary tedder is grease filled and needs no maintenance.
Gelenkwelle
40h
8h 40h
8h 8h 8h
20h
The PTO shaft(s) on the machine should be greased at
the points shown in the illustration at the time intervals
shown. At the same time, observe the operating
instructions of the PTO shaft manufacturer.
PTO shaft
5.5 Lubrication points on the rotary tedders
• Repair work on the tyres must only be carried out by qualified personnel and with suitable
equipment.
• Before repair work begins, make sure that the rotary tedder is at a standstill. Switch off the
engine and remove the ignition key.
• Place the rotary tedder on a firm, level surface. Fit wheel blocks to protect it from
accidental rolling.
• Check the air pressure regularly.
5.4 Tyres
Pressure [bar]
Undercarriage wheels (Single Axle) 1,5
Undercarriage wheels (Single Axle) inside 2,0
Designation/Brand Quantity lit
Flowing gearbox grease GFO 35 0,5 l
The specified lubrication intervals
refer to hours of operation!