Krone EasyCut F 320 M, Original Operating Instructions

Page: 54 / 94

10 Settings
10.2 Telescopic top link
54
EasyCut F 320 M
Original Operating Instructions 150000808_01_en
KMG000-025
ü
The machine is in transport position.
ü The machine is supported safely, refer to page 24 .
ü
The machine is shut down and safeguarded, refer to page 24 .
„
The high-cut skids must always be mounted underneath the cutting discs that run next to the
mower drums.
„
Insert the high-cut skid (2) into the sliding skid (1) and screw it.
10.2 Telescopic top link
KMG000-060
In order to allow the front mounted mower to adapt to the ground in the direction of travel, a
telescopic top link can be purchased as optional additional equipment.
ü
The machine is raised to the transport position via front hydraulics, refer to page 49 .
ü The machine is shut down and safeguarded, refer to page 24 .
„
To release the ground tracking in the direction of travel, shift the lockclip (1).
Setting cutting height
Setting range of cutting height, refer to page 32 .
ü
The machine is lowered to the working position via front hydraulics, refer to page 48 .
ü
The machine is shut down and safeguarded, refer to page 24 .
„ To set the cutting height, loosen the counter nuts (2,3).
„
Turn the top link until the cutting height is set.
ð
Top link longer = smaller cutting height
ð Top link shorter = greater cutting height
„
Tighten the counter nuts (2,3).