Krone Comprima V 180 Original Operating Instructions Download Page 116

Page: 116 / 242

Terminal menus

13.6

Changing mode

116

Comprima V 180

Original Operating Instructions 150001053_00_en

The value is highlighted in colour.

Press the scroll wheel.

An input mask opens.

Turn the scroll wheel to increase or reduce the value.

Press scroll wheel to save the value.

The setting is saved and the input mask closes.

Using the value

Tip the value.

An input mask opens.

Increase or reduce value.

Press

to save the value.

The setting is saved and the input mask closes.

13.6

Changing mode

It is possible to select between different modes in individual menus.

To select the next mode, press

To select the previous mode, press

To save, press

An acoustic signal sounds, the set mode is saved and the

icon is briefly displayed in

the upper line.

To leave the menu, press

13.7

Tying in the menu level

For The menu level is active,

refer to page 114

Summary of Contents for Comprima V 180



















































































































































































































































Search results

Summary of Contents for Comprima V 180

Reviews:

Krone Comprima V 180, Original Operating Instructions, Page: 116 / 242

Search results

Summary of Contents for Comprima V 180

Reviews: