7
Terminal menus
7.17
Menu 10 "Manual operation" (for the "Net wrapping" version)
44
Comprima F 125 - 1, Comprima F 125 XC - 1, Comprima F 155 - 1, Comprima F 155 XC - 1, Comprima V 150 - 1,
Comprima V 150 XC - 1, Comprima V 180 - 1, Comprima V 180 XC - 1, Comprima V 210 XC - 1
Comfort 1.0_en
Adjusting the filling correction
Increase or decrease the value,
.
To save the value, press
.
Example
The set target bale diameter is 108 cm.
If the actual bale diameter is only 100 cm and thus 8 cm too small, a correction value of + 8 cm
must be set.
This means:
Correction value=target bale diameter - bale diameter
7.17
Menu 10 "Manual operation" (for the "Net wrapping" version)
10
n
+
-
EQG003-006
ü
For The menu level is active,
To open the menu, select
.
Æ
The display shows menu “Manual operation”.
The following status displays may appear on the screen:
Icon
Explanation
Tying actuator is in feed position.
Tying actuator is in cutting position.
Tying actuator is in tying position.
Position is not defined.
The keys on the sides can be used to control the following functions:
