manualshive.com logo in svg

Krone Comprima F 125 XC-1, Operating Instructions Manual

Share
Download
Krone Comprima F 125 XC-1 Operating Instructions Manual Download Page 278

7

Terminal menus

7.3

Selecting a menu Level

34

Comprima F 125 - 1, Comprima F 125 XC - 1, Comprima F 155 - 1, Comprima F 155 XC - 1, Comprima V 150 - 1,

Comprima V 150 XC - 1, Comprima V 180 - 1, Comprima V 180 XC - 1, Comprima V 210 XC - 1

Comfort 1.0_en

Icon

Designation

Explanation

Sensor test

Quick access to sensor test (sensors relev-
ant for this menu)

Actuator test

Quick access to actuator test (actuators
relevant for this menu)

Disk

The mode or value is saved.

Plus

Increase the value.

Minus

Reduce the value.

Arrow pointing to the right

Display next mode.

Arrow pointing to the right

Display previous mode.

7.3

Selecting a menu Level

„

To bring up the menu level from the working screen, press 

.

Æ

The display indicates the menu level.

To return from the menu pages to the main menu:

„

Press 

 until the main menu is displayed.

For an overview of the menus: 

refer to page 32

.

7.4

Selecting a menu

Calling up menu

The menus are selected depending on used terminal (touch sensitive or not touch sensitive).

For version with “Touch sensitive and not touch sensitive terminal”

By means of adjacent keys

„

To select a menu, press the keys next to 

 or 

 until the desired menu is selected.

ð

The selected menu is highlighted in colour.

„

To call up the menu, press the key next to 

.

Æ

The menu opens.

Summary of Contents for Comprima F 125 XC-1























































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands