Krone Comprima F 125 XC-1, Operating Instructions Manual

Page: 286 / 374

7 Terminal menus
7.14 Menu 7 “Sensitivity of direction display”
42
Comprima F 125 - 1, Comprima F 125 XC - 1, Comprima F 155 - 1, Comprima F 155 XC - 1, Comprima V 150 - 1,
Comprima V 150 XC - 1, Comprima V 180 - 1, Comprima V 180 XC - 1, Comprima V 210 XC - 1
Comfort 1.0_en
Adjusting bale diameter
„
Increase or decrease the value, refer to page 35 .
„
To save the value, press .
7.14 Menu 7 “Sensitivity of direction display”
Comprima F
This menu is used to set the sensitivity of the direction display.
The direction display shows whether the swath is being picked up in the centre of the pick-up
and provides information on the direction in which the tractor must travel. The higher the bar on
the display, the more sensitive the direction display is set. The higher the sensitivity of the
direction display is set, the motion indication is more likely to appear in the form of arrows on
the working screen.
For the best way of filling the bale chamber using the pick-up, see chapter Operation device,
“Filling the bale chamber”.
n
7
~
~
4
EQG003-017
ü
For The menu level is active, refer to page 34 .
„ To open the menu, press .
Æ The display shows menu “Sensitivity of direction display”.
Adjusting the sensitivity of the direction display
„ Increase or decrease the value, refer to page 35 .
„ To save the value, press .