Terminal menus
7
Menu 3 “Advance signalling”
7.10
Comprima F 125 - 1, Comprima F 125 XC - 1, Comprima F 155 - 1, Comprima F 155 XC - 1, Comprima V 150 - 1,
Comprima V 150 XC - 1, Comprima V 180 - 1, Comprima V 180 XC - 1, Comprima V 210 XC - 1
Comfort 1.0_en
39
Adjusting the number of film layers
Increase or decrease the value,
.
To save the value, press
.
INFORMATION
KRONE recommends 3.5 – 4 film layers for optimum chamber film wrapping. The minimum
required film layers depend on the condition of the crops.
With round bales whose diameter measures more than 130 cm and/or very dry or very wet
crops, KRONE recommends at least one additional film layer.
7.10
Menu 3 “Advance signalling”
Advance signalling indicates that the round bale in the bale chamber is almost complete. At
which filling level advance signalling starts can be set in the terminal.
n
3
25
0
5
%
EQG003-002
ü
For The menu level is active,
To open the menu, press
.
Æ
The display shows menu “Advance signalling”.
Setting advance signalling
Increase or decrease the value,
.
To save the value, press
.
7.11
Menu 4 “Tying start delay” (net wrapping)
The time period between completion of the round bale in the bale chamber and activation of the
tying cycle is set using the tying start delay. The tying start delay is set in seconds.
Comprima F
Setting range: 0.0–1.0 s
Comprima V
Setting range: 0.0–2.5 s
