Krone BOX LINER TU 70 Operating Instructions Manual Download | Manualshive

Page: 43 / 92

background image

SUPERSTRUCTURE OPERATION

Operating instructions • Box Liner • 515108039-02 • 11/2018

43

6.2.1

Pulling out the middle exten-
sion

1

2

3

Fig. 6-2:

Operating the middle extension

1

Locking bolt for middle extension

2

Bracket for the locking bolt

3

Locking plate

► Park the trailer on level ground.

► Apply the parking brake on the trailer

(see "5.6.2 Parking brake", pg. 31)

.

► Secure the trailer against rolling away

(see "5.1 Using wheel chocks", pg. 20)

.

► Unlock the locking bolt for front exten-

sion.

► Adjust the wheelbase using the locking

bolt on the middle extension.

► Drive trailer forward until the locking

bolt engages.

► Secure the locking bolt.

► Remove the securing device that pre-

vents rolling away

(see "5.1 Using wheel

chocks", pg. 20)

.

► Disengage the parking brake on the

(see "5.6.2 Parking brake", pg. 31)

ü

Middle extension is extended.

6.2.2

Pushing in the middle exten-
sion

► Park the trailer on level ground.

► Secure the trailer against rolling away

(see "5.6.2 Parking brake", pg. 31)

.

► Unlock the locking bolt for the front ex-

(see "5.1 Using wheel chocks",

.

► Adjust the wheelbase using the locking

bolt on the middle extension.

► Drive the trailer backwards until lock-

ing bolt engages.

► Secure the locking bolt.

► Remove the securing device that pre-

vents rolling away

(see "5.1 Using wheel

chocks", pg. 20)

► Disengage the parking brake on the

trailer

(see "5.6.2 Parking brake", pg. 31)

ü

Middle extension is pushed in.

6.3

Adjusting the rear extension

The trailer can be extended to accommod-
ate different load combinations and con-
tainers. The rear extension is equipped
with a mechanical locking device and can
be locked in various positions. It is exten-
ded mechanically with a hand crank or via
a pneumatically driven motor.

It needs to be operated without containers
loaded.

!

WARNING

Risk of injury due to unlocked rear ex-
tension!

An unlocked rear extension (mechanical
or pneumatic) can extend during a trip, in-
jure people and cause material damage.

► Secure the rear extension with the

locking bolt (hand crank) before every
trip.

6.3.1

Mechanically extending the
rear extension

► Park the trailer on level ground.

► Apply the parking brake on the trailer

(see "5.6.2 Parking brake", pg. 31)

.

► Secure the trailer against rolling away

(see "5.1 Using wheel chocks", pg. 20)

.

► Unlock the hand crank for the rear ex-

tension.

«
...
41
42
43
44
45
...
»

Summary of Contents for BOX LINER TU 70





























































































Reviews:

No comments

Related manuals for BOX LINER TU 70

Sportsman 9921483

Brand: Polaris Pages: 207

Brand: TrailMaster Pages: 13

Brand: ASV Pages: 60

Brand: Egholm Pages: 12

Brand: X-TREME Pages: 25

2014 SNO PRO 500

Brand: Arctic Cat Pages: 90

Brand: Arctic Cat Pages: 68

Brand: Arctic Cat Pages: 80

Brand: Arctic Cat Pages: 76

2010 1000 H2 TRV

Brand: Arctic Cat Pages: 104

Brand: SILLA Pages: 52

Brand: Landa Pages: 38

Brand: Landa Pages: 101

Brand: Honda Pages: 65

Brand: Westbrook Trailers Pages: 34

Brand: Simplicity Pages: 58

Brand: Superior Pages: 112

Brand: john deer Pages: 30

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands