15
Settings
15.20 Checking/setting Variable Filling System (VFS)
224
BiG Pack 870 HDP XC
Original Operating Instructions 150000760_00_en
BPG000-048
In the factory, the sensing rake (11) is mounted in position (I).
In the factory, the threaded rod (9) is mounted in position (V). It must
never
be moved in
position (VI).
Setting the Variable Filling System (VFS) is required if:
•
the bale channel does not fill up sufficiently to its full height, that means the filling of the big
bale must be improved to the top.
•
the overload coupling of the packer engages too frequently.
Observe the following sequence when setting the Variable Filling System (VFS):
•
Put the Variable Filling System (VFS) in zero position,
.
•
Checking/setting triggering sensitivity
.
15.20.2
Variable Filling System (VFS) zero position
BP000-234
ü
The machine is shut down and safeguarded,
.
