Krone BiG Pack 870 HDP XC, Original Operating Instructions

Page: 110 / 410

9 Operation
9.16 Fitting wheel chocks
110
BiG Pack 870 HDP XC
Original Operating Instructions 150000760_00_en
Releasing
„
In order to release the parking brake (1), turn the crank handle (2) anti-clockwise until the
brake cable slightly sags.
Applying
„
In order to apply the parking brake, turn the crank handle (2) clockwise until a noticeable
resistance can be felt.
INFORMATION
In order to prevent the machine from rolling away, use the wheel chocks in addition to the
parking brake,
refer to page 110 .
9.16 Fitting wheel chocks
1
1
BPG000-065
ü The machine is shut down and safeguarded, refer to page 25 .
„
Place the wheel chocks (1) tightly in front of and behind the wheels (depending on slopes) to
prevent the machine from rolling away.
„ For “self-steering axle” version : Place the wheel chocks tightly in front of and behind the
wheels (depending on slopes) to prevent the machine from rolling away.
INFORMATION
In order to prevent the machine from rolling away, use the parking brake in addition to the
wheel chocks
refer to page 109 .
9.17 Initiate the tying process manually
It is only necessary to trigger the tying process manually when performing maintenance,
adjustment and repair tasks.