KRONAsteel 00022883, Application Sheet

Page: 10 / 28

10
EN Application sheet
KITCHEN HOODS
lation, connection and repair.
The model name and important technical char-
acteristics of the kitchen hood are specified in-
side the case.
Security measures
The kitchen hood is connected to the power net-
work with the voltage of 220/240 V – 50 Hz, us-
ing a wall outlet with earthing only. The kitchen
hood has 1 electrocution protection class.
Use the light bulbs with the voltage no higher
than specified in the Instructions.
It is forbidden to operate the kitchen hood with-
out an aluminum grease filter.
The air from the kitchen hood should be re-
moved to the air shaft only (its removal to the
chimney is strictly forbidden).
SAFETY OF CHILDREN
Children often do not understand the danger of
electrical appliances. While the kitchen hood is
functioning, watch your children and do not al-
low them to work with it. Packaging materials
(such as polyethylene film) may cause suffoca-
tion. Keep them out of reach of children
K
ITCHEN HOOD DESCRIPTION
The hood exterior consists of the parts as follows
(Fig. 1, 1a):
1. Hood case interior.
2. Remote control console.
3. Glass-made decorative panel.
4. Backlighting.
The kitchen hood accessories are (not included)
as follows (Fig. 2):
1. Odour catching coal filter.
To be used for air filtration in premises with a
kitchen hood to operate in the recirculation mode
(See "Kitchen hood operation").
Coal filters can be puchased at retailers'.
KITCHEN HOOD OPERATION
Your kitchen hood has 3 ventilation rates. Depend-
ing on how much damp forms during cooking and
frying, you may choose the best ventilation rate.
This will improve ventilation efficiency. To make
the air completely clear, switch on the stove and
the hood at the same time. After you have finished
cooking, let the kitchen hood operate for a while.
This will enable to eliminate damps and unwished
odors in the kitchen.
Remote control console
INGA (EU) S / IRIDA (EU) S
On the front panel of the hood there is a touch
mode switch the operation of the motor and the
light bulb (see Figure 3). Its elements have the fol-
lowing functional meaning:
1. Turn on / off the hood.
2. Reducing the speed of the motor.
3. Display showing the speed.
4. Increase the speed of the motor.
5. Turn on / off lighting.
Turning on / off the hood is done by touching the
icon 1 for 2-3 seconds. Switching speed of drawing
is effected by the icons "–" or "+".
With this switch, by pressing the corresponding
buttons You can select one of three speeds in ran-
dom order motor, turn on the lights or activate the
"Timer" function. The selected speed number is
shown on the display.
At the working hood, to activate the "Timer" func-
tion, you must press and hold the "–" and "+" but-
tons simultaneously for more than two seconds.
The timer number is indicated by the flashing digit
of the selected speed number on the display. Af-
ter 5 minutes after turning the timer on, the hood
stops automatically. This function is very conve-
nient for removing residual smell from the kitchen
after cooking.