REFRIGERATORS
Installation and operation instructions
TIPS AND SAFETY INSTRUCTIONS
SAFETY INSTRUCTIONS
labeling on the compressor. To prevent
damage to the compressor, be careful
during transport and installation. R600a is
an environmentally friendly and safe
natural refrigerant. However, you must
install your appliance away from sources
of open flames or strong heat. To prevent
explosion and/or fire, in the event of a
refrigerant leak, shut off all open flames
and open windows for a few minutes to
ventilate the room.
• During transport and installation When
installing the refrigerator, do not damage
the cooling circulation system.
• Do not, under any circumstances, store
Keep explosive substances, including
aerosol cans with highly flammable
contents, in or near the instrument.
• The instrument is intended exclusively for
but for home use.
• If the power plug of the appliance is not
matches the design of your outlet or the
length of the power cord is missing,
contact a qualified person at an
authorized service center for assistance.
Connect the device to the mains with the
voltage indicated on the device.
• This device is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge in
the absence of super-
Attention!
To avoid breakage before
turning on the equipment in the cold
season, it is necessary to keep it unpacked
at room temperature for at least 2 hours.
WARNING: The installation must be in a
ventilated place with the possibility of
dissipating heat during operation of the
freezer.
WARNING: Do not use mechanical devices,
heaters, or other technical means to speed
up the defrosting process, do not
manufacturer.
recommended
WARNING:
electrical appliances inside food storage
compartments, unless they are of the type
recommended by the manufacturer.
Do not use
WARNING: Do not disturb the refrigerant
circulation system.
WARNING: To avoid damage to the device,
as well as the risk of possible injuries during
operation, install the device on a flat surface,
fix it in accordance with the instructions.
• If the unit uses a coolant dagent R600a,
then the relevant information is indicated
on the information
2
