manualshive.com logo in svg

KROMA LM5009, User Manual

Share
Download
KROMA LM5009 User Manual Download Page 24

Manual de Usuario Serie LM5000 

 - 23 - 

 
 The 

PROGRAM FUNCTION

 Menu, allows to program diverse aspects of the system, 

as they are:  
 

- 

DECODER

: it configures the decoder for PAL/NTSC or SECAM signal. It 

is  only for composite video signal. In order to change the decoder function 
press the CAL key. 

 

- 

FILTER

: Decoder output filter. It can be a COMB or NOTCH filter. It is  

only for composite video signal. In order to change the output filter,we will 
be located upon the windows selection and we press the CAL key.  

 

- 

AFC

: it allows to syncronize composite video signals coming from VTR in 

FAST way. It is only for composite video signal. In order to modify the AFC 
press  the CAL key. 

 

- 

AGC

: Automatic Gain Control. If it is configurated in ON mode, 

independently of the origin signal, it will establish nominal values for the 
signal when it is presenting/displaying on the screen. It is only for composite 
video signal. In order to modify the AGC press the CAL key. 

 

- 

COLOUR

: Colour of the picture. It is only for composite video signal. It can 

have the AUTO value, so, such picture would have the colour adjusted in the 
saturation, or it could be MONO, so, the picture would be displayed in black 
and white. It is necessary to consider, if the MONO option is active, the 
equipment saturation will not be able to be changed. In order to change the 
colour press the CAL key.  

 

- 

APERTURE: 

Aperture Control. This function only appears in LM5009  

equipments, since they do not have associated key to such function as 
equipment LM5015 and LM5018  (APT key).  This option is only for 
composite video signals.  
      

 In order to change the image aperture we will be located in this option and 
we will press the CAL key, then, it will appear a  new menu:

  

 

 

Summary of Contents for LM5009





























Reviews:

No comments

Brands by name

Popular brands

Load more brands