KROM KEXAL, User Manual, Page: 3 / 14

Android V3 Standard mode:
IOS mode (for IOS 13.0 version or above):
Nintendo Switch
TM
wireless mode:
Nintendo Switch TM and PC 2.4 GHz wireless mode:
Nintendo Switch
TM
and PC wired mode:
Press and hold X + HOME at the same time for 3 seconds to enter Android Standard mode,
LED3 will flash quickly, turn on BT on your Android device, search and select "Krom Kexal" to
connect, LED3 will stay on after connecting successfully.
If the gamepad has been connected before, you can press HOME to reconnect, LED3 will
flash slowly, then it will reconnect automatically.
Press and hold B + HOME at the same time for 3 seconds to enter IOS mode, LED2 will flash
quickly, turn on BT on your Android device, search and select "Krom Kexal" to connect, LED2
will stay on after connecting successfully.
If the gamepad has been connected before, you can press HOME to reconnect, LED2 will flash
slowly, then it will reconnect automatically.
Press and hold R2 + HOME at the same time for 3 seconds to enter Switch
TM
mode, LED will
blink rapidly, after pairing the LED will be solid.
If the gamepad has been connected before, you can press HOME to reconnect, the LED
indicator will flash slowly, then it will reconnect automatically.
When charging the gamepad while connected, the current LED will blink until the device is
fully charged.
The gamepad will be automatically recognized by the system when connected by cable.
Plug in the cable to connect the gamepad, LED1-LED4 will flash.
1: The default mode in PC is X-Input, LED1 will be steady.
Press and hold HOME 3 seconds to switch to D-Input mode, then LED2 will be on steady.
2: Switch
TM
will automatically assign a LED indicator which will remain fixed after connection.
If your PC or Switch TM doesn't have BT, you can use the included 2.4G receiver. Press and hold
L1 + HOME at the same time for 3 seconds to enter 2.4G mode. LED1 & LED2 will blink rapidly,
LED1 & LED2 will be steady after connecting.
The default mode is X-Input, press and hold START for 3 seconds to switch to
D-Input mode.
EN