11
K-Wheel Pro
User Manual
INDEX
∆ QUIT ALL PROGRAMS
1.
Press the PROG button: the red LED will flash fast. Press PROG again to exit, the previous
setting will remain unchanged.
2.
Press the PROG button, the RED LED flashes rapidly, the programme will exit automatically if no
action is taken within 10 seconds.
∆ SENSITIVITY ADJUSTMENT
1.
Press the PROG button. The red LED will flash fast.
2.
Press the D-pad left or right to set the sensitivity to Medium, the red LED will light up
continuously once the sensitivity is achieved.
3.
Press the PROG button. The red LED will flash fast.
4.
Press the D-pad up to set the sensitivity to High: the red LED will light up
continuously once the sensitivity is achieved.
5.
Press the PROG button. The red LED will flash fast.
6.
Press the D-pad down to set the sensitivity to Low: the red LED will light up
continuously once the sensitivity is achieved.
7.
Press the OPTIONS / 10 / MENU / + buttons for 4s, the red LED will light up continuously and
Sensitivity will be restored to default.
Functions programming
∆ Quit all programs
∆ Sensitivity adjustment
K-Wheel Pro’s buttons
Installation
Technical Specifications
Buttons configuration
∆ Introduction
∆ Program setup
∆ Clear single program
∆ Clear all programs
∆ Foot pedals
∆ Gear lever buttons
∆ Setting max. angle below
900º rotation mode
∆ Restore steering wheel’s
calibration to default
Summary of Contents for K-Wheel Pro
Page 1: ...USER GUIDE...
Page 18: ......
