GB-8
D
GB
F
NL
I
E
Contact
If you have any technical questions, please contact
your local branch office/agent. The addresses are
available on the Internet or from Elster GmbH.
We reserve the right to make technical modifications
in the interests of progress.
Elster GmbH
Strotheweg 1, D-49504 Lotte (Büren)
Tel. +49 541 1214-0
Fax +49 541 1214-370
[email protected], www.kromschroeder.com
Logistics
Transport
Protect the unit from external forces (blows, shocks,
vibration).
Transport temperature: see page 7 (Technical
Transport is subject to the ambient conditions de-
scribed.
Report any transport damage on the unit or packag-
ing without delay.
Check that the delivery is complete, see page 2
(Part designations).
Storage
Storage temperature: see page 7 (Technical data).
Storage is subject to the ambient conditions de-
scribed.
Storage time: 2 years before using for the first time.
If stored for longer than this, the overall service life will
be reduced by the corresponding amount of extra
storage time.
Packaging
The packaging material is to be disposed of in ac-
cordance with local regulations.
Disposal
Components are to be disposed
Declaration of Incorporation
pursuant to 2006/42/EC, Annex II, No. 1B
The products “Burners for gas ZAI and ZKIH” are
partly completed machines pursuant to Article 2g
and are designed exclusively for installation in or as-
sembly with another machine or other equipment.
The following essential health and safety requirements
in accordance with Annex I of this Directive are ap-
plicable and have been fulfilled:
Annex I, Articles 1.1.3, 1.1.5, 1.3.2, 1.3.4, 1.5.2,
1.7.4, 1.5.10
The relevant technical documentation pursuant to
Annex VII B has been produced and will be transmit-
ted to the competent national authorities in electronic
form on request.
The following (harmonized) standards have been
applied:
– EN 746-2:2010 – Industrial thermoprocessing
equipment – Safety requirements for combustion
and fuel handling systems
– EN ISO 12100:2010 – Safety of machinery – Gen-
eral principles for design – Risk assessment and
risk reduction (ISO 12100:2010)
The partly completed machine may only be com-
missioned once it has been established that the
machine where the product mentioned above is to
be incorporated complies with the provisions of the
Machinery Directive 2006/42/EC.
Elster GmbH
Scan of the Declaration of Incorporation (D, GB) – see
www.docuthek.com
Contact
