6
User – Settings
User – Settings
Set time and day of the week
1
Turn selector switch to 1...7.
▷
Minute display flashes.
Mo Tu We Th Fr Sa Su
2
Use the rotary knob to set the minutes.
Press the OK button to confirm.
▷
Hour display flashes.
4
Use the rotary knob to set the hours.
5
Press the OK button to confirm.
6
Use the rotary knob to set the week day.
7
Press the OK button to confirm.
▷
The new time and the day of the week is displayed.
▷
The clock continues to run for at least 10 min. without a power
supply.
8
Turn selector switch back to
.
Set the desired temperature
The desired temperatures set the room temperatures for the heating phase
(desired daytime temperature) and the setback phase (desired night-time
temperature). The desired temperature for the hot water can be adjusted.
▷
The desired hot water temperature can only be set if the system
has a storage tank.
▷
Factory setting:
Desired daytime room temperature: 20 °C,
Desired night-time room temperature: 10 °C
Desired hot water temperature:
60 °C
▷
The desired daytime room temperature cannot be lower than
the desired night-time room temperature.
▷
The desired night-time room temperature cannot be greater than
the desired daytime room temperature.
1
Turn selector switch to .
▷
Desired temperature selection is displayed, flashes.
Mo Tu We Th Fr Sa Su
2
Press the OK button.
▷
The desired day-time room temperature flashes.
Use the rotary knob to select the desired daytime room tem-
perature.
▷
The temperature can be set in 0.5 °C increments.
4
Press the OK button to confirm.
▷
The new desired temperature is displayed.
