12
User – Settings
Example interruption of heating time.
If you leave the house for a few hours, you can reduce the heating
during an active heating program to save energy. Once the set time
has ended, the system automatically reverts to the current heating
program.
1
Turn selector switch to /Eco.
2
Switch the rotary knob to “Reduce”.
▷
The current desired night-time temperature and the valid heating
program are displayed, flashes.
Mo Tu We Th Fr Sa Su
0
6
12
18
24
2
Press the OK button.
▷
Hour display flashes.
Use the rotary knob to select the reduction time in hours.
4
Press the OK button to confirm.
▷
Reduction starts straight-away.
5
Finally, turn the selector switch back to
.
Early ending of heating time.
1
Turn selector switch to /Eco.
2
Press the OK button.
▷
The run-time remaining is displayed and flashes.
Use the rotary knob to set number of hours to
0
.
4
Press the OK button to confirm.
5
Finally, turn the selector switch back to
.
Load factory settings (Reset)
▷
All personal settings, switching times and the CODE-NO are
reset to the factory defaults.
1
Take a note of all the settings you have made in these instruc-
tions, see page 13 (List of parameters P01 to P04).
2
Disconnect the device at the plug.
When switching the mains back on, keep the OK button pressed
until
EE P
appears in the display.
▷
The factory settings have been loaded.
