Kroks ARINST VNA-PR1 Manual Download Page 6

Page: 6 / 48

2-port vector network analyzer ARINST VNA-PR1

4. COMPLETENESS

4.1. The delivery set of the device is shown in Table 2.
Table 2

Name

Quantity

The vector network analyzer ARINST VNA-PR1 1-6200 MHz

1 pc.

USB 2.0

– Mini-USB cable

1 pc.

SMA (female)

– SMA (female) adapter

2 pc.

Manual (product passport)

1 pc.

Package

1 pc.

Due to the continuous improvement of the device and software, the manufacturer reserves the
right to make changes to its technical characteristics and completeness.

5. STRUCTURE OF THE DEVICE

5.1. The device structure is shown in Figure 5.1.

Figure 5.1 - External view of the device

1. Measuring port 1

(PORT 1) is intended for connecting the test devices and acts as a source and

receiver of the signal.

2. Measuring port 2

(PORT 2) is intended for connecting the test devices and is a signal receiver.

3. High frequency connector panel
4. Color resistive screen 4

”

serves to configure the device through the on-screen menu and display

measurement results in the form of user-defined plots and charts.

5. Indication panel
6. Multi-function button.

Turns on and off the device when pressed and held for more than 2 se-

conds. When pressed once, it opens or hides the main menu of the device.

7. Indicator STATUS.

Lights up when the device is on.

8. Battery charging indicator CHARGE.

Lights up when the battery is charging and when the device

is operating from USB. Turns off when charging is complete.

9. Connector Mini-USB.

Serves for data transmission and battery charging of the device.

Summary of Contents for ARINST VNA-PR1

















































Search results

Summary of Contents for ARINST VNA-PR1

Reviews:

Related manuals for ARINST VNA-PR1

Brands by name

Popular brands

Kroks ARINST VNA-PR1, Manual

Search results

Summary of Contents for ARINST VNA-PR1

Reviews:

Related manuals for ARINST VNA-PR1

Brands by name

Popular brands