INSTALLATION
2
9
OPTIWAVE X500
www.krohne.com
06/2017 - 4005809801 - AD ATEX OPTIWAVE x500 R01 en
2.1 Special conditions
This device can be installed on the applicable auxiliary equipment: a bypass chamber, a stilling
well or a communicating pipe.
2.2 Precautions
2.2.1 General notes
Make sure that:
•
you can get access to the device,
•
there is sufficient space around the device for inspections,
•
you can see the device nameplate, and
•
there are no external forces applied on the device.
WARNING!
When you install the device, obey the conditions in the EU-Type Examination certificate or the
Type Examination certificate. These conditions include:
•
The special conditions for safe use.
•
The Essential Health and Safety Requirements.
The certificates are given on the DVD-ROM supplied with the device. You can also download the
certificates from our internet site.
DANGER!
This installation must agree with EN 60079-14: Explosive atmospheres
–
Part 14: Electrical
installations design, selection and erection.
DANGER!
The device contains a PEEK boundary wall between the process and the signal converter. Do not
use the device if the PEEK part is not resistant to corrosion by the tank product.
