background image

 DEVICE DESCRIPTION 

2

11

OPTIBAR DP 7060

www.krohne.com

05/2017 - 4005720001 - AD OPTIBAR 7060 Ex db ia R01en

2.7.2  With electronics P (Profibus PA), F (Foundation Fieldbus)

The metallic parts of OPTIBAR DP 7060 VGK7*A/W/V E/Z/6/7 are electrically connected with the 
ground terminals.

The supply and signal circuit is reliably isolated from parts which can be grounded by a galvanic 
isolation.

2.7.3  With separate cable outlet

The metallic parts of OPTIBAR DP 7060 VGK7*A/W/V E/Z/6/7 are electrically connected with the 
ground terminals.

The supply and signal circuit is reliably isolated from parts which can be grounded by a galvanic 
isolation.

OPTIBAR DP 7060 VGK7*A/W/V E/Z/6/7 with electronics P (Profibus PA), F (Foundation 
Fieldbus), version with single chamber housing A, V

Supply and signal circuit:

(Terminals 1[+], 2[-] in electronic 

compartment)

Indicating and adjustment circuits: 

(terminals 5, 6, 7, 8)

U

i

 = 9...32 VDC

U

m

 = 253 VAC

Circuit for the display and adjustment 

module: (spring contacts in the 

electronic compartment)

For connection to the display and adjustment module.

OPTIBAR DP 7060 VGK7*A/W/V E/Z/6/7 with electronics P (Profibus PA), F (Foundation 
Fieldbus), version with double chamber housing D, W

Supply and signal circuit:

(Terminals 1[+], 2[-] in terminal 

compartment

Indicating and adjustment circuits: 

(terminals 5, 6, 7, 8)

U

i

 = 9...32 VDC

U

m

 = 253 VAC

Circuit for the display and adjustment 

module: (spring contacts in the 

electronic compartment)

For connection to the display and adjustment module.

OPTIBAR DP 7060 VGK7*A/W/V E/Z/6/7 version with separate cable outlet 
(all electronics)

Circuit between sensor and external 

electronics

(terminal 1 - yellow, 

terminal 2 - white, terminal 3 - red, 

terminal 4 - black)

in protection type intrinsic safety Ex ia IIC

For the OPTIBAR DP 7060 VGK7*A/W/V E in the version with 

the permanently mounted cable to the measuring sensor unit 

and external electronics, the length of the supplied cable 

between the external housing and the measuring sensor unit 

should not exceed 180 m.

Summary of Contents for OPTIBAR DP 7060





















Reviews: