KROHNE BATCHFLUX 3100, Quick Start Manual

Page: 16 / 24

3
ELECTRICAL CONNECTIONS
16
BATCHFLUX 3100 C
www.krohne.com 09/2020 - 4008472601 - QS BATCHFLUX 3100 - R01 en
3.1 Safety instructions
3.2 EMC regulation
EMC radiation limits are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment
DANGER!
All work on the electrical connections may only be carried out with the power disconnected.
Take note of the voltage data on the nameplate!
DANGER!
Observe the national regulations for electrical installations!
WARNING!
Observe without fail the local occupational health and safety regulations.
Any work done on the electrical components of the measuring device may only be carried out by
properly trained specialists.
INFORMATION!
Look at the device nameplate to ensure that the device is delivered according to your order.
Check for the correct supply voltage printed on the nameplate.
CAUTION!
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference to radio
communications.
CAUTION!
The device shall not be used with long-distance lines longer than 30 meters, or which leave the
building (including lines of outdoor installations).
CAUTION!
This equipment is not intended for use in residential environments and may not provide
adequate protection to radio reception in such environments.