Quick Start Guide
For more in depth information about your V Series monitors go to
www.krksys.com
and download
the manual and spec sheets. There you’ll find all the information needed to help you make the most
of your new monitors now and in all your future projects.
What’s in the box?
Power Cable
Optional Grille with screws and instructions
Custom KRK key for easy adjustment of your preferred eq settings.
IMPORTANT:
Before powering up the monitors, be sure all connections have been made, all fader
and controls should be set at their minimum levels, and all other equipment should be turned on
prior to powering up your KRK monitors.
Note:
Your V Series monitors have friction lock, Neutrik combo connectors for the input. Use an XLR
cable or TRS 1/4” balanced cables to connect to your interface, mixing board or monitor controller.
On the back of the monitor, read all the info about the switches carefully.
With the
LOW CONTROL
and
HIGH CONTROL
, we have given you 49 different combinations of eq
voicings to help you correct for your studio’s acoustics to deliver more accurate monitoring. See
below for an explanation of the choices we are giving you. Start with
LOW CONTROL
and
HIGH
CONTROL
switches set to L4 and H4 respectively, which is flat, no cut or boost and the –dB LEVEL
ATTENUATION on 0. Set them up in your room according to the diagram below. Listen to some of
your favorite songs and mixes. Try different positions in your room and placement before making eq
adjustments and then adjust the eq to give you your best listening and monitoring experience.
Tip: See the manual online for great advice on speaker placement and room management.
