3. Press the card and it will pop out of socket.
4. Connect the card to your computer using a card reader.
Warning
: Do not use Mac OS X. Macintosh operating system creates hidden indexing files an all
connected drives. Those files can corrupt the main board.
Notice
: Make sure that your card reader is high quality and the USB cable can power the reader.
Some low-quality card readers need additional power supply to work correctly.
5. Check if on the SD card is an old .hex file. If so remove it and empty the trash.
6. Place new .hex file on the card.
Notice
: You can request .hex file from
Kriss-Sport Support.
7. Use your operating system hardware removal tool to safely remove the SD card from the reader.
8. Put the SD card back in the socket on the main board.
9. Turn on the machine and wait for the update procedure to complete.
Notice
: While updating first you’ll see „BOOT” message on the display, next „ENDBOO”, and finally
„INIT”. After that machine will start normally.
15
