7
5.2 Wing
5.2.1 Servo install
First, we will schedule the cables of individual servos of the ailerons to the receiver / central unit.
The cable of the servo of the left upper aileron is led through the shaft into the hole in the lower
part of the cover in the space of the inter-wing strut (for easier routing of the cable, a string is
prepared here).
The cable then continues through the interwing strut to the left lower wing, where it continues from
the root of the lower wing to the fuselage of the model. The same goes for the right side. To
maintain the demountability of the wings and the inter-wing struts, the cable between the wing and
the inter-wing strut should be interrupted by connectors.
It is advisable to use PowerBox ONE4ONE cable sets. 2 cables (upper left and lower left aileron
servos) protrude from the root of the lower wing. Here it is suitable to use the PowerBox
ONE4TWO cable set between the fuselage and the wing.
The cable outlet terminated with a connector (ONE4TWO) from the root rib of the lower wing has
proven to be fastened by means of a mounting frame.
