KRESS KUE11, Safety And Operating Manual

Page: 12 / 16

12
Lithium-Ion brushless circular saw
KUE11 KUE11.9
COMPONENT LIST
1. SAFETY SWITCH
2. ON/OFF TRIGGER
3. SOFT GRIP HANDLE
4. HEX KEY
5. BLADE GUARD LEVER
6. BLADE GUARD
7. BASE PLATE
8. PARALLEL GUIDE
9. CUTTING MARK, 0°
10. CUTTING MARK, 45°
11. PARALLEL GUIDE CLAMPING FIXTURE
12. BEVEL ADJUSTMENT LEVER
13. DUST EXTRACTION OUTLET
14. VACUUM ADAPTER
15. FIXED UPPER BLADE GUARD
16. SPINDLE LOCK BUTTON
17. DEPTH ADJUSTMENT LEVER
18. BLADE BOLT
19. OUTER FLANGE
20. SAW BLADE*
21. INNER FLANGE
22. BATTERY PACK*
*Not all the accessories illustrated or described
are included in standard delivery.
TECHNICAL DATA
Type KUE11 KUE11.9 (E11- designation of
machinery, representative of Saw)
KUE11 KUE11.9
Voltage 20V Max**
No load speed 6900/min
Blade size 140mm
Cutting capacity
Cutting Depth at 90° 51mm
Cutting Depth at 45° 35mm
Bevel capacity
0-45°
Machine weight
(Bare tool)
1.8kg
**Voltage measured without workload. Initial battery
voltage reaches maximum of 20 volts. Nominal voltage
is 18 volts.
ACCESSORIES
KUE11 KUE11.9
140mm saw blade 1 1
Battery pack 2(KAB21) /
Charger 1(KAC21) /
Parallel Guide 1 1
Vacuum Adaptor 1 1
Strap 1 1
We recommend that you purchase your accessories
from the same store that sold you the tool. Refer to the
accessory packaging for further details. Store personnel
can assist you and offer advice.
OPERATING
INSTRUCTIONS
NOTE: Before using the tool, read the
instruction book carefully.
WARNING: Do not release the handle until the saw
blade come to complete stop and do not touch saw
blade while the saw blade is running.
Intended use: The tool is intended for ripping and
cross-cutting wood and other materials in straight
cutting lines, while resting firmly on the work piece.
ASSEMBLY AND OPERATION
ACTION FIGURE
ASSEMBLY
Mounting and Removing the Blade
NOTE: Lock or loose the blade
bolt, the spindle lock button should
be pressed.
WARNING: Always remove
the battery before changing
the blade!
See Fig. A
Safety switch and On/Off trigger
WARNING: To avoid cutting
injury from the sharp blade,
please don’t put your hands around
the Base Plate.
NOTE: Keep the dust adapter
connected to dust collecting device
when using the tool.
See Fig. B