background image

7

Demolition Hammer 

KU340.1

OPERATION

1. Start/stop 

Press the start/stop switch to start the machine. 

Release the start/stop switch (6) to stop the machine.

2 Continuous operation

Start: Press the start/stop switch (6) and lock the switch 

with the self-locking button (5) to keep it activated.

Off: Press the start/stop switch (6) and release it 

immediately.

Warning: If the machine is severely hot, 

make your machine run for 2-3 minutes 

without load to cool the motor.

MAINTENANCE

Remove the plug from the socket before 

carrying out any adjustment, servicing or 

maintenance.

There are no user serviceable parts in your power 

tool. Never use water or chemical cleaners to clean 

your power tool. Wipe clean with a dry cloth. Always 

store your power tool in a dry place. Keep the motor 

ventilation slots clean. Keep all working controls free 

of dust. Occasionally you may see sparks through the 

ventilation slots. This is normal and will not damage 

your power tool.

If the supply cord is damaged, it must be replaced by 

the manufacturer, its service agent or similarly qualified 

persons in order to avoid a hazard.

Summary of Contents for KU340.1









Reviews: