3
EN
GENERAL SAFETY WARNINGS FOR YOUR
LASER LEVER
WARNING: Read all safety warnings and all
instructions.
Failure to follow the warnings and
instructions may result in serious injury.
Save all warnings and instructions for future
reference.
These lasers do not normally present an optical hazard
although staring at the beam may cause flash blindness.
Do not stare directly at the laser beam. A hazard may exist if
you deliberately stare into the beam, please observe all safety
rules as follows:
1. Laser radiation, do not stare into beam.
2. The laser shall be used and maintained in accordance
with the manufacturer’s instructions.
3. Never aim the beam at any person or an object other than
the work piece.
4. The laser beam shall not be deliberately aimed at another
person and shall be prevented from being directed
towards the eye of a person for longer than 0.25 seconds
area.
5. Always ensure the laser beam is aimed at a sturdy work
piece without reflective surfaces, e.g. wood or rough-
coated surfaces are acceptable. Bright shiny reflective
sheet steel or similar is not suitable for laser applications
as the reflective surface may direct the laser beam back at
the operator.
6. Do not change the laser device with a different type.
The manufacturer or an authorized agent must carry out
repairs.
7. CAUTION: Use of controls or adjustments other than
those specified herein may result in hazardous radiation
exposure.
8. Do not use this product in flammable, explosive, corrosive
environments or near medical equipment or aircraft.
Safety Warnings for battery cells inside the tool
a) Do not dismantle, open or shred cells.
b) Do not short-circuit charging terminal. Do not
store power tool haphazardly in a box or drawer
where charging terminal may short-circuit
each other or be short-circuited by conductive
materials.
When power tool is not in use, keep it away
from other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can make
a connection from one charging terminal to another.
c) Do not expose power tool to heat or fire. Avoid
storage in direct sunlight.
d) Do not subject power tool to mechanical shock.
e) In the event of battery leaking, do not allow
the liquid to come into contact with the skin
or eyes. If contact has been made, wash the
affected area with copious amounts of water
and seek medical advice.
f) Seek medical advice immediately if a cell has
been swallowed.
g) Keep power tool clean and dry.
h) Wipe the charging terminals with a clean dry
cloth if they become dirty.
i) Power tool needs to be charged before use.
Always refer to this instruction and use the
correct charging procedure.
j) Do not maintain power tool on charge when not
in use.
k) After extended periods of storage, it may
be necessary to charge and discharge the
