
16 English
Device description
BH-EN / 0907
EN
Residual risk.
Although this information sheet and
the operating manuals for our electrical tools con-
tain extensive instructions on safe working with
electrical tools, every electrical tool involves cer-
tain residual risks that cannot be completely pre-
vented through safety mechanisms. Therefore,
electrical tools must always be operated with the
necessary caution.
3. Device description
For help, please use the enclosed illustrations
showing the device. Open these illustrations while
reading the operating instructions.
Operating elements
I
Unlocking sleeve
II
Operating mode switch
III
Gear selector/Rotation stop switch
IV Adjuster for speed selection (optional)
V
On/Off control switch
VI Stop button
VII Left/Right rotation switch
VIII Interlock button mains cable module
IX Unlocking sleeve drill chuck (optional)
Device components
1
Tool holder
2
Dust protection cap
3
Additional handle
4
Depth stop
5
Mains cable module / fixed supply
6
Screwing adaptor
7
Quick-action drill chuck
8
Mounting spindle (optional)
Contents
See packaging
The pneumatic hammer drill is intended for univer-
sal use for hammer drilling in concrete, brick and
stone and for light chisel work (Exception: chisel
work with 550 PH not possible).
It is also suitable for drilling without impact in wood,
metal, ceramic and plastic.
The tool must only be operated, maintained and
serviced by authorised trained personnel. The per-
sonnel must be made aware of the relevant dan-
gers.
The vibration emission level will vary because of
the ways in which a power tool can be used and
may increase above the level given in this informa-
tion sheet. This could lead to underestimation of vi-
bration when the tool is used regularly in such a
manner.
Note:
To be accurate, an estimation of the level of
exposure to vibration experienced during a given
period of work should also take into account the
times when the tool is switched off and when it is
running but not actually when doing the job.
Read all the warnings and instruc-
tions before using the equipment.
Failure to follow the warnings and
instructions may result in electric
shock, fire and/or serious injury.
Specified Conditions of Use
Requirements for the user
Technical data
Mains voltage in V / Frequency in Hz
Nominal power rating P in Watts
Noise levels
L
pA
= A-rated noise level
L
wA
= A-rated noise output level
K =
Measurement uncertainty
value
The noise level can exceed 85 dB(A)
during operation.
Wear hearing protection!
Triaxial vibration emission level deter-
mined in accordance with EN 60745.
K = Measurement uncertainty value
The vibration emission level given in
this information sheet has been
measured in accordance with a
standardised test given in EN 60745
and may be used to compare one tool
with another.
This may significantly reduce the exposure level
over the total working period.
37231_BA_Bohrhammer_West.book Seite 16 Montag, 13. Juli 2009 7:55 07
Summary of Contents for HAMMER DRILL
Page 174: ...174 Notizen Notes Notizen 0907 ...
Page 175: ...Notizen Notes 175 Notizen 0907 ...