13
EN
Tall grass working schedule
For the first mowing when the grass grows very tall after
winter or a long holiday, you can change it to tall grass
mowing mode by keep pressing
button for 5
seconds until a beep sound is heard. Press
then
to start mowing. MissionNANO™ will resume to
previous start time and the default working duration in the
following days.
Change default start time
The default start time of 9:00 can be changed to anytime
by keep pressing both
and
buttons at
the same time for 3 seconds until a beep sound is heard.
For example, keep pressing both
and
buttons at 14:05, and your MissionNANO™ will be
mowing from 14:05 to 18:05.
NOTE:
If your MissionNANO™ is shut off, it will resume to
default working duration and the start time will resume to
previous setting when the machine is re-started.
NOTE:
When you replace the battery, the working
duration will resume to default working duration and the start time is set to the moment when the battery re-
connected.
5.5 How efficiently will my MissionNANO™ mow the grass?
Mowing times are different for every lawn depending on the factors mentioned below. Gradually adjust the time
you allow MissionNANO™ to mow each day until you find the most suitable setting.
Your MissionNANO™ is capable of mowing areas of different sizes, although this depends on various factors,
such as:
• Species of grass in your lawn and its growth rate
• Sharpness of the cutting blades
• Humidity
• Surrounding temperature
• Amount of obstacles in your Lawn
Unlike most other mowers, MissionNANO™ uses a side charging system, which is able to cut the much
surrounding grass as possible. The holes on the bottom of the charging base allow the grass to grow through
the base to help disguise it and create an elegant appearance.
MissionNANO™’s cutting height can be adjusted between
3cm-6cm. Before starting your MissionNANO™ for the
first time, you should cut the grass to the height no more
than 9 cm. Then, set the cutting height to its maximum
setting, 6cm. (See Fig. G)
Your MissionNANO™ will cut its best in dry weather. Wet
grass can build up on the blade turning disc and within
the motor, and can also cause loose traction and slippage
while working.
Your MissionNANO™ is afraid of lightning storms. In case
of a lightning storm, protect MissionNANO™ by unplugging the charging base, disconnecting the boundary
wire, and making sure MissionNANO™ is not allowed to charge.
Your MissionNANO™ loves mowing grass and requires the cutting blades to be kept in good condition to
cut at its best. MissionNANO™ can do most things by itself, but will sometimes need your help to prevent
damage to itself.
• Never let MissionNANO™ travel over gravel.
0:00 24:00
Day 1
Day 2
Day 3
4hrs
4hrs
10hrs
0:00 24:00
Everyday
4hrs
4hrs
