© 2015 by Krell Industries, LLC
All rights reserved
Vanguard Family - Owner's Reference
www.krellonline.com
6
The Vanguard Universal DAC
Figure 2 - Rear Panel
HDMI
Inputs and Outputs
The Vanguard is equipped with 2 HDMI Inputs and 1
Output.
Ethernet
The Ethernet port connects the Vanguard to a home
network for control, firmware updates and network
streaming.
IR In
The Vanguard is equipped with an RC-5 input that
makes custom installation easy and secure by
accepting baseband RC-5 input commands from a
remote IR detector or hard wired remote controllers.
12 VDC In/Out (12 V trigger)
The 12 V Trigger input allows you to place the
Vanguard into the stand-by or operational mode from
other components. The 12 V trigger output allows the
Vanguard to turn other components on or off.
Power Switch
Use this power switch to change the Vanguard from
off to the stand-by mode.
AC Power Cord Receptacle
The connector is for use with the provided IEC stan
-
dard 15 amp power cord. This connector and power
cord must remain unobstructed for easy removal in
case of emergency.
Balanced Analog Outputs
The Vanguard is equipped with one pair of
balanced outputs via XLR connectors.
Single-Ended Analog Outputs
The Vanguard is equipped with one pair of single-
ended outputs via RCA connectors.
Digital Audio Inputs
The Vanguard is equipped with one coaxial and
one optical digital input.
Using this disables the front panel IR detector.
