Krell KAV–2250 and KAV–3250
19
Reconfiguration Options,
continued
Reconfiguring the KAV–2250 for MAT: Send One Input Signal
to Both Output Channels via Input 2
Not illustrated
To send the signal from a source device connected to input 2:
1. Push switch 2 up (on) for both input switch banks.
2. Push switch 1 down (off) for both input switch banks.
Reconfiguring the KAV–3250 for MAT: Send One Input Signal
to All Three Output Channels via Input 1
See Figure 7 on page 17
To send the signal from a source device connected to input 1:
1. Push switch 1 up (on) for all input switch banks.
2. Push switches 2 and 3 down (off) for all input switch banks.
Reconfiguring the KAV–3250 for MAT: Send One Input Signal
to All Three Output Channels via Any Input
Not illustrated
You can send the signal from any of the inputs, depending on your preference,
for example:
To send the signal from a source device connected to input 2:
1. Push switch 2 up (on) for all input switch banks.
2. Push switches 1 and 3 down (off) for all input switch banks.
or
To send the signal from a source device connected to input 3:
1. Push switch 3 up (on) for all input switch banks.
2. Push switches 1 and 2 down (off) for all input switch banks.