Evolution 505 SACD/CD Player
Owner’s Reference, v06.0
Krell Industries, Inc.
45 Connair Road
Orange, CT 06477-3650 USA
This product complies with the EMC directive (89/336/EEC) and the low-voltage directive
(73/23/EEC).
IMPORTANT SAFETY INSTRUCTIONS
1.
Read Instructions.
2.
Keep these Instructions.
3.
Heed all Warnings.
4.
Follow all Instructions.
5.
Do not use this apparatus near water.
6.
Clean only with dry cloth.
7.
Do not install near any heat sources such as radiators, heat registers, stoves, or other appa-
ratus (including amplifiers) that produce heat.
8.
Unplug this apparatus during lightning storms or when unused for long periods of time.
9.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus
has been damaged in any way, such as a power-supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
10. Caution: Visible and invisible laser radiation. When the cover is open, avoid exposure to the
beam. This apparatus employs a laser. To prevent possible eye injury, only a qualified service
person should remove the cover, or attempt to service this apparatus. Use of controls or
adjustments or performance of procedures other than specified herein may result in hazardous
laser radiation exposure.
11. The apparatus must be placed on a firm, level surface where it is not exposed to dripping or
splashing.
12. The ventilation grids on the top of the apparatus and the space underneath it must be unob-
structed at all times during operation. Do not place flammable material above or beneath the
apparatus.
13. Before making connections to the Evolution 505, ensure that the power is off and other compo-
nents are in mute or stand-by mode. Make sure all cable terminations are of the highest quality,
free from frayed ends, short circuits, or cold solder joints.
14. THERE ARE NO USER SERVICEABLE PARTS INSIDE AN EVOLUTION 505 SACD/CD
PLAYER.
Please contact Krell if you have questions not addressed in this guide.
This product is manufactured in the United States of America. Krell
®
is a registered trademark of Krell Industries, Inc., and is restricted for use by
Krell Industries, Inc., its subsidiaries, and authorized agents. Evolution Bias
™
is a trademark of Krell Industries, Inc. and is a Krell technology
based on U.S. Patent No. 5,331,291. CAN Link
™,
CAST
™, Evolution
CAST
™,
and Krell Current Mode
™
are trademarks of Krell Industries,
Inc. All other trademarks are registered to their respective companies.
© 2006 by Krell Industries, Inc. All rights reserved
P/N 309405-W
TEL 203-298-4000
FAX 203-891-2028
E-MAIL [email protected]
WEBSITE http://www.krellonline.com
