Pull out the slides on both sides of the cabinet
so they are approximately 10” from the front
of the face frame.
Position the drawer box in the opening so it
balances on the brackets. Position the end
of the slide so that it sets back from the
face of the drawer box.
Start a screw at the endpoint of the slide.
Continue to add screws and then pull the
drawer box out further to finish the process.
Remove brackets and you have perfect drawer
box alignment!
For frameless cabinets, reverse the brackets
end-for-end and swap sides so the long toe
points inward as shown. Move the brackets into
position so that they contact the base of the
slides. Clamp into place as shown and continue
mounting the drawer box as described in the
framed cabinet example above.
2.
3.
4.
1.
To use with frameless cabinets…