7
Operation – Cut the Plugs from the
Blank
a.
Mark a line in location 1 that is 3/16" (5 mm) from the bottom edge of
the plug blank.
b.
Apply a strip of masking tape across the plugs to keep them in position
while cutting.
c.
Cut along the line at a 15° angle with a band saw, scroll saw, multi-
purpose oscillation tool, or fine-tooth hand saw.
3/16"
(5mm)
15°
1
Operation – Plug the Pocket Holes
a.
Glue plugs in letting approximately 1/16" (2 mm) of the plug protrude.
b.
Once glue is dry, sand the plug flush.
