Attach Legs to Bottom Shelf
In hindsight, it might have been easier to attach these legs from the top by drilling 1 1/2" pocket holes into the 4x4 posts and
screwing into the bottom shelf and frame using 2 1/2" pocket hole screws. But, that didn't cross my mind until after the
fact. So you can do it that way (recommended), or you can place your bottom shelf up on a pair of Kreg Track Horses and
screw the legs in on the corners from the bottom using 3" wood screws like shown here. Either way you attach, cut four 4x4
legs according to the cut list and attach them at the corners of the bottom shelf. Also, the total bench height is 34 1/2" to
match my table saw height. If you wish for a shorter bench, adjust the length of your legs in this step.
3
Page 7 of 19
Summary of Contents for DIY Mobile Workbench with Storage Shelf
Page 2: ...Page 2 of 19...